CommScope OneCell RP5100i, Hardware Installation And Commissioning

Page: 107 / 108

Chapter 6 Verifying the OneCell installation
OneCell
®
Installation and Commissioning, RP5000 series, Release 4.0 6-9
D
R
A
F
T
Verify local network connectivity
The Core LED on Baseband Controller front panel helps identify if Local Network
Connectivity is available for the IPSec/S1 Interface.
Use ping tests to verify connectivity for other the interfaces on the Baseband
Controller.
• Controller Management interface
• Radio Point interface
Table 6-4. CORE LED – local network connectivity issues
State Events
Red, solid Internet – No
Interface hardware issues
Verify core network connectivity
The core network includes:
• IPsec connection
• Configuration from HeMS
• MME connection
Table 6-5. CORE LED states
State Events
Green, solid Power ON
Connection to MME – Yes
Amber, Info blink IPsec – Yes
Connection to MME – No
OFF Firmware upgrade
Red, Info blink Internet – Yes
IPsec – No
Red, solid Internet – No
Interface hardware issues