Page 6 of 8
© 2019 CommScope, Inc. All Rights Reserved
9.2.2
Place the gel strip on top of the first drop port.
9.2.3
Prepare the 2nd drop cable the same way as the
first one. Put the cable on top of the gel strip and then push
the drop cable down.
9.2.4
Secure the drop cable with Cable ties as shown.
9.1.5
Route the fiber into the correct tray using the
groove. Make the splices. Store the splice protector and the
fiber overlength properly.
Note:
The bottom tray can store 1 field installable sp
18 splice protectors (2x9 double layer) smouv 45.
9.1.6
Other trays can store 12 splice protectors (single
layer) smouv 45.
9�2
Installing 2 cables per drop port
(0-5�5 mm)
In case 2 cables per drop port need to be installed, the use
of 2 cm gel strip is mandatory.
9.2.1
Cut 2 cm of the gel strip.
Gel strip to be ordered separately:
S1515-30X1.5X700-AUTO-N
