TC-96203-IP
Installation Instructions
www.commscope.com
Page 9 of 10
Figure 10. Cleaning Optical Port Connecter and Adapter
5
O-Ring Lubrication
The O-rings used on the hardened connector and on the optical port dust cap are lubricated when shipped
from the factory to prevent damage during installation.
If the O-rings become excessively dry, they may require additional lubrication to prevent damage. Remove
the O-rings from the connector or dust cap and apply a small amount of lubricant directly to each ring.
Then reinstall the O-rings on the connector or dust cap. Apply only the recommended O-ring lubricant
(MST-ACC-LUBE1).
