4. Commissioning
M0200AJA_ION-U_EU_L_17EP_17EP.docx
User’s Manual for ION
®
-U
Page 39
4.2.5. Mains power connection
Before connecting electrical power to the units, the system must be grounded (earthed)
as described in the previous chapter.
The Mains power must be connected to the Mains connector of the unit for operation
of the EU. A power cable is delivered with each EU. The type of power cable delivered
is dependent on the type of power supply in the unit.
The AC power cable is a 3.2 m (10.5 ft) 16 AWG cable with a 4-pin Amphenol C016
series plug on one end to connect to the EU Mains connector. The other end of the
cable is un-terminated with 3 end splices to connect to the AC power source. A 10 m
(33.7 ft) AC power cable is also available as an option.
4-Pin Amphenol C016
Series
Pin
Name
Color
1
Phase
Black
2
Neutral
White
3
n.c.
n.c
4
Ground
Green
figure 4-19 AC power cable
table 4-2
AC power cable
The standard DC power cable is a 3.2 m (10.5 ft) 13 AWG cable with a 4-pin Amphenol
C016 series plug on one end to connect to the EU Mains connector. The other end of
the cable is un-terminated with 2 end splices to connect to the -48 Vdc power source.
4-Pin Amphenol C016
Series
Pin
Name
Color
1
n.c
n.c
2
–48V
Black
3
0V
Red
4
n.c.
n.c
figure 4-20 DC power cable
table 4-3
DC power cable
black
Amphenol 4-Pin
female connector
Protective Cap
3x end splice
white
green
B0400A4A
RU Mains
Connector
4
3
2
1
black
Amphenol 4-Pin
female connector
Protective Cap
2x end splice
red
B0400A5A
RU Mains
Connector
4
3
2
1
Summary of Contents for ION-U EU L 17EP/17EP
Page 1: ...ION U ION U EU L 17EP 17EP User s Manual M0200AJA ...
Page 66: ......
