ADCP-96-167 • Issue 5 • July 2016
Page 16
© 2016, CommScope, Inc.
Figure 9. Grounding Wire Connection To Cabinet
2. Obtain a length of #6 AWG copper wire for use as a grounding wire.
3. Insert one end of the grounding wire into the cabinet grounding lug. Tighten the
grounding lug set screw to 34 to 36 lbs-force inches (3.8 to 4.1 Nm) of torque.
4. Route the free end of the grounding wire to an approved earth ground source.
5. Cut the grounding wire to length and connect it to the earth ground source as
specified by local code or practice.
Warning: Failure to properly tighten the screw on the grounding lug could result in improper
grounding of the cabinet and result in performance or safety issues.
TIGHTEN TO 34 TO 36
LBS FORCE-INCHES
(3.8 TO 4.1 Nm)
OF TORQUE
#6 COPPER
GROUNDING
WIRE
24215-A
