PMT200B SERIES DryLine
®
DEHYDRATOR USER MANUAL
7
Open carton.
Default password is 1111
Familiarize yourself with the controls and
displays prior to installing or testing the
dehydrator.
See drill template AE01B-D0526-001 included
with installation kit.
Keypad Controls:
Advances display (scrolls ahead) to the
next display or program mode with out
changing the values in the microprocessor
memory.
Enters into the microprocessor memory
the values displayed in the window and
advances display (scrolls ahead) to the
next program or display mode.
Numerically increase displayed settings in
display window. When depressed longer
than 1/2 second scrolling will occur at a
faster rate.
Numerically decrease displayed settings
in display window. When depressed
longer than 1/2 second scrolling will occur
at a faster rate.
Used to allow the user quick access to the
system event log.
EV= 0 Event = Power Up
EV= 1 Event = High Humidity Alarm
EV= 2 Event = Excessive Run Time Alarm
EV= 3 Event = Low Pressure Alarm
EV= 4 Event = High Pressure Alarm
EV= 5 Event = Compressor Fault
EV= 6 Event = Log Cleared
EV= 7 Event = Powering Down
EV= 8 Event = Compressor Lifetime Eeprom
Fail
Check the dehydrator for shipping damage such
as dents or loose parts.
2.1.1 Installation Kit Items
Polyethylene Tubing Kit,
(25 FT)
PTFE Tape, 1/4 Wide
(1 Roll)
Ball Valve, 3/8 Poly To 3/8 Poly
(1)
Male Conn, 3/8" Poly To 1/8 NPT Male
(2)
Street Elbow Fitting, 1/8 NPT (M-F)
(2)
Power Cord, w/Nema 515p Plug (North
America) (1)
Power Cord, IEC, Harm, (Stripped Leads)
(1)
Screw Pan Head, 10-32 X .50,
w/Plastic Washer
(8)
