CommScope Arris G34 Page 66 User Manual Download

Page: 66 / 76

Chapter 8: Managing your Wi-Fi cable modem and connected networks

View the G34/G36 software version

The Gateway Software Version screen displays device software related information for

your G34/G36. This information may be helpful if you have to contact ARRIS or Comcast for

technical support.
To open the G34/G36 Software screen:
1. From any G34/G36 Web Manager screen, click the

Gateway

menu link.

2. Click

Software

from the Gateway submenu links to display the Gateway Software

screen.

Figure 61: G34/G36 hardware information screen

Set up an Ethernet port connection for your data

input

If you have installed your G34/G36 using an Ethernet port for your data input, perform the

following to activate the Ethernet port.
To open the Gateway hardware Ethernet screen:
1. From any G34/G36 Web manager screen, click the

Connection

menu link to display the

Status

and

WAN

submenu links.

2. Click the

WAN

submenu link to open the Gateway Connection WAN screen.

SURFboard

G34/G36 DOCSIS

3.1 Wi-Fi

Cable Modem User Guide STANDARD Revision x.3

Summary of Contents for Arris G34













































































Search results

Summary of Contents for Arris G34

Reviews:

Related manuals for Arris G34

Brands by name

Popular brands

CommScope Arris G34, User Manual

Search results

Summary of Contents for Arris G34

Reviews:

Related manuals for Arris G34

Brands by name

Popular brands