CommScope Arris G34 User Manual Download

Page: 65 / 76

Chapter 8

Managing your Wi-Fi cable modem and

connected networks

You can also use the G34/G36 Web Manager to view and monitor the network configuration

settings and operational status of your G34/G36.

View the G34/G36 system hardware information

The Gateway Hardware screen displays system hardware information for your G34/

G36. This information may be helpful if you contact ARRIS, Comcast, or Cox for technical

assistance.
To open the G34/G36 Hardware screen:
1. From any G34/G36 Web Manager screen, click the

Gateway

menu link.

2. Click

Hardware

from the Gateway submenu links and then click

System Hardware

from

the Hardware submenu options to display the Gateway System Hardware screen.

Figure 60: G34/G36 System Hardware screen

SURFboard

G34/G36 DOCSIS

3.1 Wi-Fi

Cable Modem User Guide STANDARD Revision x.3

Summary of Contents for Arris G34













































































Search results

Summary of Contents for Arris G34

Reviews:

Related manuals for Arris G34

Brands by name

Popular brands

CommScope Arris G34, User Manual

Search results

Summary of Contents for Arris G34

Reviews:

Related manuals for Arris G34

Brands by name

Popular brands