Argus
®
Installation Instructions
Multi-Beam Panel Antenna 5NPX1006F
Bulleti Bulletin D701-0005 • Revision D • July 2013 page 1 of 8
CommScope Infrastructure Academy offers installation training
General
This instruction sheet contains all necessary information required to assist in the correct installation
of ARGUS Multi-Beam Panel Antennas.
The following symbols can be found next to text outlining important information.
Please follow the procedure marked with this symbol precisely.
Non-compliance may lead to damage of the product.
Handy tips when installing product.
Unpacking
To make sure no pressure and load on the radome of this antenna in handling and
fixing.
Make sure that the antenna and the accessory items listed below are provided and have not been
damaged during transport.
•
Antenna
•
Mounting kit
•
Installation Instructions (This document)
Mounting Kits
Type
Fixed Downtilt
F-042-GL-E
Mechanical Downtilt
T-045-GL-E
Do not install near power lines. Power lines,
telephone lines, and guy wires look the same.
Assume any wire or line can electrocute you.
Do not install on a wet or windy day or
when lightning or thunder is in the area.
Do not use metal ladder.
Wear shoes with rubber soles and heels.
Wear protective clothing including a
long-sleeved shirt and rubber gloves.
