background image

8

User manual CIBS Personal Listener (NO_GB_F_D_NL_ES_SE_DK_SU) 1f

NO

EN

F

D

NL

ES

SE

DK

SU

EN

the Battery indicator lamp 

7

 on the CIBS Neck Loop/ 

14

 on the Liberto 

will illuminate solid blue. 

When the battery level is low, the Battery indicator lamp 

7

 on the CIBS 

Neck Loop/ 

14

 on the Liberto  will flash red and at the same time you will 

hear a signal from the CIBS Neck Loop.
To recharge CIBS Neck Loop/Liberto (without clip) in the Twin Charger 

Cradle you have to push the unit down and out to the side in the charging 

cradle. Push the the unit down and in toward the centre of the charging 

cradle to remove the device.
To recharge Liberto with the clip you have to you twist the

clip upwards. Push the Maestro down in the charging cradle until you 

hear a click. Push the Maestro down and then push the clip towards the 

Maestro to remove the unit from the Audiostreamer. 

NOTE:

 The lifetime of the battery will be significantly reduced if  the

device is left uncharged for extended periods. We advise you to charge 

the device at least once a month.

When the operating time of the battery begins to decrease and you wish 

to replace it, please send it to your local dealer.  

The article number of the battery is: 956-001

Installing the Twin Charger Cradle

Connect the accompanying power supply to the power socket 

9

.

The Twin Charger Cradle will switch itself on automatically. You will not 

be able to see this unless you place the CIBS Neck Loop/Liberto into the 

charger and ensure they are charging. The Charger Cradle has no on/off 

button and will not use power as long as you don’t charge anything in it.
A removable device is included that allows you to charge CIBS products

both with and without clips in the charging cradle. If you wish to charge

CIBS products without clips this must be placed down in the charging

station, as shown in the picture together with the assembly instructions

on page A.
If you would like to place the Twin Charger Cradle on the wall, you can

use the accompanying brackets. Assembly instructions on page A. 

Switch on/off the CIBS Neck Loop/Liberto

How to switch on the CIBS Neck Loop/Liberto:

Press and hold in the On/Off button 

• 

2

 on the CIBS Neck Loop/  

Summary of Contents for CIBS AUDIO

















Reviews: