Item #
1
006347236/ 1006347203
Model #
564221410/ 564221420
Hardware Included
Part
description
Quantity
AA
Mounting Bracket
1
BB
Mounting Screw (for
Bracket)
2
CC
Wire Connector
3
Use and Care GUIde
10
In. CeIlInG Closet lIGht wIth PUll ChaIn
note
:
Keep your receipt and these instructions for proof of purchase.
warnInG
:
RISK OF ELECTRIC SHOCK. Ensure the electricity to the wires you are working on is shut off. Either remove the
fuse or turn off the circuit breaker before removing an existing light fixture or installing the new one.
If you are unfamiliar with electrical installations, we recommend you contact a qualified electrician to do the installation.
InSTallaTIOn
Select a suitable location that can support the weight of the fixture. Determine the method for mounting the fixture before
drilling, based on the type of ceiling.
1. Pass the hot and neutral (black and white) wires from the electrical outlet box through the middle hole of the mounting
bracket (AA).
Align the mounting bracket (AA) using the mounting screws (BB) and tighten securely to the electrical box.
2. Connect the hot and neutral (black and white) wires from the J-box to the same color wires from the fixture body (A).
Connect the grounding wire from the J-box to the green wire from fixture base (A). Cover the wire connections using the
wire connectors (CC). Make sure to fasten them well.
3. Cover the wire connectors (CC) with electrical tape for a more secure connection.
4. Position the wires back inside the electrical box.
5. Align the side slots on the fixture body (A) with the mounting bracket (AA) and fix the fixture body (A) securely by carefully
rotating in clockwise the side slots inside the mounting bracket (AA).
6. Restore power at the electrical panel. Pull the chain down to turn the light on and off.
PacKaGe cOnTenTS
Part
description
Quantity
A
Fixture Body
1
A
AA
BB
CC
STeP 1.
STeP 2.
STeP 3.
BB
AA
AA
CC
A
Side slot
Questions, problems, missing parts? Before returning to the store,
call Commercial Electric Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday
9 a.m. - 6 p.m., EST, Saturday
1-877-527-0313 | HOMedePOT.cOM
Retain this manual for future use.
care and cleanInG
CaUtIon:
Before attempting to clean the tube and luminaire/light fixture, disconnect the power to the fixture by turning the
breaker off or removing the fuse from the fuse box. Clean with a soft, dry cloth. Do not use cleaners with chemicals, solvents, or
harsh abrasives. Do not use liquid cleaner on the LEDs, LED driver, or wiring.
TrOubleSHOOTInG
Minor problems often can be fixed without the help of an electrician.
warnInG:
Before doing any work on the fixture, disconnect power to the light fixture.
warnInG:
Carefully read and understand the information given in this manual before beginning the assembly and installation.
Failure to do so could lead to electric shock, fire, or other injuries which could be hazardous or even fatal. • Ensure the electricity to
the wires you are working on is shut off. Either remove the fuse or turn off the circuit breaker. • To reduce the possibility of serious
injury, always take the proper precautions and unplug the fixture before moving or cleaning. • Risk of fire or electric shock.
notICe:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving
antenna, increase the separation between the equipment and the receiver, connect the equipment into an outlet on a circuit different from
that to which the receiver is connected, and consult the dealer or an experienced radio/TV. Changes or modifications not expressly approved
by the party responsible for compliance could void the user’s authority to operate the equipment.
warranTY
wHaT IS cOVered
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of five (5) years from
date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If
this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the
product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications,
alterations, neglect, or mishandling.
wHaT IS nOT cOVered
This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in anyway not in accordance
with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse,
abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not
apply to the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear.
The manufacturer does not warrant and specifically disclaims any warranty, whether express or implied, of fitness for a particular purpose,
other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential
or incidental loss or damage, including but not limited to any labor / expense costs involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-877-527-0313 or visit www.HomeDepot.com.
Problem
Possible cause
Solution
The fixture will not light.
The power is off.
Ensure the power supply is on.
The circuit breaker is off.
Ensure the circuit breaker is in the on position.
There is a bad connection.
Check to ensure proper wire connections are made.
Contact a qualified electrician.
There is a defective switch.
Contact a qualified electrician.
The fuse blows or the circuit
breaker trips when the light is
turned on.
The wires are crossed or the power
wire is grounding out.
Check the wire connections.
Contact a qualified electrician or call customer service
1-877-527-0313.
