GE 800
4. Cabling
4.2/0617
13
Connection of digital and analogue Intercom stations
For digital and analogue Intercom stations, installation boards are required to connect them to the
Intercom Server (
Installation board G8A-C for 4 subscribers
Overview installation board G8A-C
Connection over patch panel
Between G8A-C and the patch panel, a standard Cat 5 cable – e.g. ASK KAT5/1 (1 m, 3.3 ft) or ASK KAT5/
5 (5 m, 16.4 ft) – of our selection should be used, because these cables are not cross-jointed. A standard
Intercom cable can be used between jack and Intercom station (the cables that are delivered with each
station are cross-jointed).
Connection scheme patch panel
NOTE: Connection DSP subscriber card
At DSP subscriber cards G8-GED, only “A” and “B” are connected.
NC = not connected
GEAC 700
C
A
B
D
NC
NC
NC
NC
1st subscriber
Plug connection
2nd subscriber
3rd subscriber
4th subscriber
G8A-C
EE 411 / EE 811A
Patch panel
Socket
Standard Cat 5 cable
Standard
Intercom cable
