Appendix
Control Station Duetto
164
1.7/1217
Select the event “Logic tag triggered” and in the field
Tag name
, enter the same logic tag that has
been entered for the button in the custom screen (in this case “bc_1”).
Select the action “Start broadcast”.
In the field
Receiver address
, enter the multicast or unicast IP address and the port of the receiver.
In the field
Label
, enter the desired label.
In the drop-down list
Audio-codec
, select the desired audio codec.
Click on
APPLY
.
Example 2:
Configuration of a DND button or Privacy Mode button
By default, the buttons to activate and deactivate the DND mode (“Do-not-disturb-mode” for phone/
SIP) or the Privacy Mode (for Intercom) can be found on the device in the regarding audio setting
screen of the phone function or the intercom function (
). You can also create buttons with
similar functions on personalized screens. Tapping on this buttons on the screen toggles the DND
mode or the Privacy Mode. The function “button visual feedback” will show the regarding status.
Example “Configuration of a DND button”
Create a button
Go to:
CUSTOMIZATION > SCREENS
in the WebConfig (
Click on the button
to configure the respective keypad sidebar (
Click on
Add Screen
. A new button appears in the screen configuration.
NOTE: Parameter bust me equal on sender and receivers
These parameters must have the same value on both the sender and receivers.
1
2
A
Screen
Toggles phone DND Mode (active, inactive)
Toggles intercom Privacy Mode (active, inactive)
Logic tag
Logic tag
triggered
Triggers logic rule
Tag name:
toggle_DND /
toggle_privacy
Logic rule
„My Screen“
2
Visual feedback info status
Button
previewed on
1
Visual feedback
on button
2
Button visual feedback
on tagged button
Tag name:
toggle_DND
toggle_privacy
Status: active
Status: inactive
Functionality
B
toggle_DND / toggle_privacy
DND_toggle / Privacy_toggle
toggle_DND / toggle_privacy
toggle_DND /
toggle_privacy
Press button „toggle_DND“
Press button „toggle_privacy“
1
1
1
2
2
2
1
1
2
