Control Station Duetto
Program interface
1.7/1217
141
Door opener
At an incoming call from a door station, the user of the DUETTO device can accept this call and open
the door via output control.
Configuration CCT 800
Go to:
Subscriber > Door Opener
Right-click on the desired subscriber and select “add door opener function”.
Go to:
Subscriber > Door Opener >
desired subscriber
>
tab
General
Right-click on the desired subscriber and select “add output”.
At an incoming door call, the following screen appears on the DUETTO device:
User interface “incoming door call”
Tap on the blue bar to accept the incoming door call. The following screen appears:
User interface “door opener”
Tap on the blue bar during an active door call in order to cancel the door call and to open the door,
or
tap on the handset button to cancel the door call without opening the door.
ATTENTION: Control of two or more doors
If the DUETTO device shall control two or more door stations, select the option “default call” in the sec-
tion “Door Calls” at
CUSTOMIZATION > CALL INTERFACE
ATTENTION: Memory in Intercom Server required
Configured door stations require memory in the main memory of the Intercom Server. A list of the
memory capacities and further information about the configuration of door openers can be found in
the manual “
Intercom Server Configuration
“!
