Program interface
Control Station Duetto
124
1.7/1217
Active calls
User interface “active calls”
Tap on the list button to indicate the settings for an active call. The following settings are available:
Microphone mute
: Tap on the crossed-out microphone button to mute the own microphone
during a call. The symbol turns red. By tapping the microphone button a second time, the
microphone will be activated.
Pause call
: Tap on the pause button to interrupt one or more calls.
Change audio source
: Tap on the audio source button to change the audio source for the call
(handset, loudspeaker, headset – if connected).
Terminate call
:
Tap on the red handset button or hang up the handset to cancel an active call.
ATTENTION: Mute function only for single calls
The mute function is only valid for the currently active call!
ATTENTION: Restrictions at control desk function
Intercom calls can only be paused if DUETTO is configured as a primary control desk (
ATTENTION: Handset is activated when picked up
The handset will be activated automatically when picked up before or during a call!
ATTENTION: Continue conversation without handset
If you hang up the handset and want to continue the call via loudspeaker, change the audio source
first!
