Commend C-G3-TEL, Product Manual

Page: 28 / 30

General telephone functions G8-TEL / G3-TEL
28 2.0/0817
Attendant contact for “off-hook”
For the telephone interface, an attendant contact can be defined. This contact becomes active as soon
as the telephone interface goes off-hook (as soon as the call number of telephone interface is dialled).
Configuration CCT 800

Subscriber > Attendant contacts

Right-click on the telephone interface and select the option “Add attendant contact”.

Subscriber > Attendant contacts > folder Attendant contact

Right-click on the blank background and select “Add Output”.

Subscriber > Attendant contacts > folder Attendant contact > tab Call no. / Function

Click on Configure Functions.

In the field Call no. / Function , enter the call number of the telephone interface.

Click on Accept .
Conferences (6T, 7T and 8T)
The following conference features are available:

6T : radio conference

Listening to a channel and talking into a channel at the telephone.

7T : predefined conference

Initiating a “7T conference” at the telephone.

8T : conference

On the telephone, a conference can be initiated in the Intercom system. The telephone can also be
invited by an Intercom station to a conference.
NOTE: V24 messages
If a (listed) call number has been defined for the attendant contact, it is possible to put out V24 mes-
sages (e.g. for Studio).
NOTE: ICX messages
For information on configuration to put out ICX messages, see manual “ ICX Protocol ”.
ATTENTION: Telephone interface as conference subscriber
 Talk only with mode T key: Tap .

The max. time simplex for the telephone interface has to be set to 1 second ( Interfaces > TEL >
folder Telephone Interface > Telephone functions ).
NOTE: Cancel listening
Listening to a radio channel can be cancelled with “6T0”.
NOTE: 7Tx participant
It is not possible to invite a telephone as “7Tx participant” automatically.
NOTE: Further information
For further information on conferences, see manual “ Intercom Server Configuration ”.