EB8E4A
Introduction
1.0/0315
5
System requirements
GE 300 (min. CCT 4.0 build 1002 / min. PRO 4.0 series) with G3-GED
GE 800 (min. CCT 4.0 build 1002 / min. PRO 4.0 series) with G8-GED
ET 808A (min. V2.5 DSP800A build 2)
Technical data
Functions in front of the cell
3-colour lamp & key switch
For further information regarding to “Attendance 1” and “Attendance 2”, see
Inputs:
8 x digital inputs for voltage free contacts
(switches, push buttons, relay outputs, etc.)
Attention
: For the switching position “ON”,
the switch resistance has to be less than 1 k
Ω
!
Outputs:
4 x relay outputs
(2 x changeover and 2 x NO contacts)
30 V / 1 A: 200,000 make-and-break cycles
30 V / 2 A: 100,000 make-and-break cycles
Operating temperature range:
–20 °C to +60 °C (–4 °F to +140 °F)
Operating temperature range:
–20 °C to +60 °C (–4 °F to +140 °F)
Plugs:
2 x expansion bus
7 x screw terminals for I/O
1 x I/O plug
Power supply:
5 VDC external supply via ET 808A
The module has to be connected to a SELV LPS circuit only!
Dimensions (WxDxH):
130 x 65 x 15 mm
(5.12 x 2.56 x 0.59 inch)
Weight incl. package:
about 160 g (0.35 lbs)
