2
1. System introduction
2. System Capacity
This system was designed to exchange the communication between Nurse and
patient with Master station and sub station by data communication system
This system was composed with master station which can control and display in the
system and Power controller, and the sub station was composed with 4 wire type
and it can be covered maximum 32 ea sub station from 1 mater station, and It can
be installed the presence switch, emergency switch and corridor light.
2.1 System Capacity
- Sub Station: 32ea / Each Patient Room
(Consisted of: Presence S/W (1), Emergency S/W (2), 2 Color Corridor Light (1))
- Emergency Display for Corridor Light: 16 Circuits
- Inductor: 4-way indication lamp
- Interphone (Master Station): 90 Circuits
2.2 System Dimension
- Master Station: 240 (L) x 200 (W) x 90 (H)mm
- DSS: 240 (L) x 129 (W) x 70 (H)mm
2.3 Power Requirement
- Power Source: 220V
- Input Frequency: 57Hz ~ 63 Hz
- Power (Emergency): DC 24V, 6.5A
3. System Feature
3.1 Digital control type
3.2 The end user can put the programming of BED no and room no by end user ‘s
control, and in case of emergency case, everybody know the place clearly.
3.3 Speaker phone function
3.4 The mater station can be covered the sub station (MAX 48ea from 1 master
station)
3.5 16 Digit 2 line LED DISPLAY (Year, months, time, display)
3.6 In case of main power off, there have a EEPROM to keep the program, no need
the re- programming
3.7 The corridor lamp display by 2 color lamp or 3 color lamp (emergency and
normal case)
3.8 Each mater station can be communicated
www.safemag.ru
www.safemag.ru
