TFB
CL5
6
Operation
:
The wireless controller has a total of
six buttons:
1.)
Emergency stop button
2.)
On\Off\Start Button
3.)
Arrow Left
4.)
Both arrows
5.)
Arrow Right
6.)
Dashes
The first push of the button activates
the function. A second push
deactivates the function.
Power On Process:
There are three major steps in the
process of Powering on the
transmitter handset.
1.)
Disengage the emergency
shut off switch. This is done
by twisting the switch,
clockwise or counter-
clockwise.
2.)
Turn the function knob (2)
from the off position to the
start position and hold for
two seconds. This initiates the sync process in which the handset will connect and start
the receiver unit.
Note: When turning the function knob to the Start position, the knob will automatically fall into
the on position. The function knob needs to be in the start position first before going to the on
position. This begins the sync process.
1.)
The syncing procedure takes approximately 20 to 25 seconds. During this time, the status
button will blink red indicating syncing is in progress.
Summary of Contents for TFB-CL5
Page 1: ...T r a f f i cF l o w Bo a r d...
Page 7: ...USER GUIDE 7 Exploded View...
Page 8: ...TFB CL5 8...