4K HDBaseT 4x4 Matrix Switcher
4.
System Operations
4.1
Front Panel Button Control
4K HDBaseT 4x4 Matrix Switcher provides with convenient front panel button
control. Here we make a brief introduction to the system operations.
4.1.1
Switching I/O connection
1) To convert one input to an output:
Operation: “input”+““ENTER”
Example: input 1 to output 2
Note: In default status, 4 IR OUT sockets correspond with 4 HDMI INPUTS. When
you convert an HDMI input to an output, the corresponding IR OUT will be switched
synchronously.
2) To convert an input to several outputs:
Operation: “input” + “output” + “output” +… + “ENTER”
Example: Switch input 2 to output 2, 4
3) To convert an input to all outputs:
Operation: “input” + “ALL” + “ENTER”
Example: Convert input 1 to all outputs
Note:
Indicators of the pressed buttons will blink green for three times if the
conversion is done, then it will be off. If the conversion failed, they will be off
immediately.
4.1.2
EDID Management
4K HDBaseT 4x4 Matrix Switcher features EDID management to maintain
compatibility between all devices. It can be controlled via EDID learning and EDID
invoking.
EDID Learning (from output):
Comm-tec Srl
14
www.comm-tec.it
