4K HDBaseT 4x4 Matrix Switcher
3.4
Connection Procedure
1)
Connect HDMI sources (e.g. DVD) to HDMI inputs of the 4K HDBaseT 4x4
Matrix Switcher with HDMI cables.
2)
Connect auxiliary audio sources to the AUDIO IN ports with audio cables.
3)
Connect HDBaseT receivers (e.g. HDMI Twisted Pair PoC Receiver) to the
HDBaseT Output ports with twisted pair.
4)
Connect HDMI displays (e.g. HDTV) to HDMI outputs of the 4K HDBaseT 4x4
Matrix Switcher or the receivers with HDMI cables
5)
Connect speakers/earphones to AUDIO output ports
6)
Connect the RS232 port of control device (e.g. a PC) to the RS232 port of either
4K HDBaseT 4x4 Matrix Switcher or far-end receivers. RS232 signal can be
transmitted bi-directionally between 4K HDBaseT 4x4 Matrix Switcher and
far-end receivers.
7)
4K HDBaseT 4x4 Matrix Switcher can collect IR signal sent by the included IR
remote via its built-in IR sensor or through external IR receiver connected to the
IR IN/ IR EYE/ IR ALL IN port. The IR signal can be transmitted bi-directionally
between 4K HDBaseT 4x4 Matrix Switcher and far-end receivers.
8)
Connect a DC 24V power adapter and the 4K HDBaseT 4x4 Matrix Switcher.
Note:
1.
Connect HDBT ports of 4K HDBaseT 4x4 Matrix Switcher and far-end receiver
with straight-through cable.
2.
IR receivers connected to IR IN& IR ALL IN should be with carrier. If not, send
command %0900. or %0901.to activate native carrier mode or force carrier
mode in the IR matrix launched between 4K HDBaseT 4x4 Matrix Switcher and
far-end receivers.
Comm-tec Srl
12
www.comm-tec.it
