COMFORTPOOL EasyHeat 2, User And Service Manual

Page: 23 / 32

23
4.2. Initial operation
In order to heat the water in the pool
(or hot tub), the filter pump must be
running to cause the water to
circulate through the heat pump. The
heat pump will not start up if the
water is not circulating.
4.3. Hose connection
The 2 pieces of hose and 2 clamps
are included in the accessories
package.
4.4. Electrical connection
Before connecting the unit, verify that the supply voltage matches the operating voltage of the heat pump.
The RCD plug has been included with power cable, which can offer electrical protection against an electrical
shock caused by a possible short circuit inside the unit.