comfortel 1400 IP Advanced Information Download Page 351

Page: 351 / 718

COMfortel 1400 IP/2600 IP/3600 IP - Firmware V2.8 - Advanced Information - V02 06/2017

351

Local Answering Machine

Answering Machine List

Listening to Recordings (Messages, Voice Memos and Call
Recordings)

Proceed as follows:

•

Using the telephone

1. Open the answering machine list.

2. In the list field on the left, above the answering machine list, select one

of the following options:

Todas las grabaciones

: Displays all the entries saved in the answering

machine list.

Solo mensajes

: Only displays the messages saved in the answering

machine list.

Solo notas de voz

: Only displays the voice memos saved in the

answering machine list.

Solo grabaciones directas

: Only displays the call recordings saved in

the answering machine list.

Archivo

: Displays the answering machine list archive.

3. Select a recording.

4. Tap on

5. Select one of the following options:

Interrupts the recording playback.

Jumps backwards 5 seconds when the recording is being played
back.

Ends the recording playback.

Summary of Contents for 1400 IP















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 1400 IP

Reviews:

Related manuals for 1400 IP

Brands by name

Popular brands

comfortel 1400 IP, Advanced Information

Search results

Summary of Contents for 1400 IP

Reviews:

Related manuals for 1400 IP

Brands by name

Popular brands