comfortel 1400 IP Advanced Information Download Page 170

Page: 170 / 718

170

COMfortel 1400 IP/2600 IP/3600 IP - Firmware V2.8 - Advanced Information - V02 06/2017

Contacts and Phone Number Lists

Call Log

Ninguna notificación

: No e-mails are sent.

Sólo para las llamadas perdidas

: E-mails are only sent if the call was

missed.

Sólo todas las llamdas

: E-mails are sent for those calls that can be

selected below.

Adjuntar grabación en directo

The call recording is attached to the e-mail.

Delete recording after sending

Sent call recordings will not be deleted automatically

Missed calls will be forwarded via e-mail. At that, it will be distinguished

between call types (see below).

Marcar el mensaje enviado como leído

If an e-mail was sent, the call will be marked as read.

•

Llamadas desconocidas

•

Llamadas externas

•

Llamadas internas

•

Llamadas de alarma

•

Llamadas de puerta

•

Otras llamadas

Misssed calls of this call type will be forwarded via e-mail.

Registrar llamadas salientes

Registrar llamadas entrantes

Outgoing/incoming calls will be saved in the call log.

Summary of Contents for 1400 IP















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 1400 IP

Reviews:

Related manuals for 1400 IP

Brands by name

Popular brands

comfortel 1400 IP, Advanced Information

Search results

Summary of Contents for 1400 IP

Reviews:

Related manuals for 1400 IP

Brands by name

Popular brands