CONTROLLER
CUSHION
Massage
areas
Heat
Push to turn heat
on / off
Intensity selector
Mode indicator lights
(M1 - M5)
Mode selector -
choose from 5
pre-programmed
massage
modes
On / Off
Intensity indicator lights
(LO, MED, HI)
Push for Neck/
Upper back massage
Push for Mid-back
massage
Push for Lower Back/
Lumbar massgae
Push for Leg / Thigh
massage
Body zone
indicator lights
OPERATING MANUAL
10 MOTOR MASSAGE MAT WITH HEAT
Please read all instructions before using model 60-2907P04.
Contents
Model 60-2907P04 Massaging Mat with home adapter
Getting started
1. Pull the non-elastic strap around mat back and fasten it to its supporter.
2. To use massage mat at home, connect the AC adapter output
(voltage: +12V 1A) male-plug with the female-plug on the back
of the mat. Then plug the AC adapter into a wall socket (voltage: 120V/60Hz).
AC Adaptor Connector Position
3. Lie comfortably on the mat and use the hand controller to select the desired functions.
Caution:
Be careful not to damage the mat with plastic fasteners during installation.
Heat
Press the "HEAT" button to turn the heat function on or off. A built-in thermostat is to
control the temperature within a safe range.
Note: This product uses a warming heat as shown. It is not intended to be used as a
therapeutic heating pad. Please allow a few minutes to reach maximum temperature.
Mat reaches maximum temperature of 140F after approx. 7 minutes.
Built-in Timer
The cushion has a built-in timer that deactivates the cushion after 15 minutes.
After 15 minutes of use please wait 15 minutes and simply turn cushion on again.
