1. Attach the massager to a chair or other support with the elastic strap.
2. Connect the adapter cable to the cable on the cushion.
3. Plug the home adapter into an outlet or the car adapter into your car’s power
receptacle.
4. a) Press the power button to turn on the massager
,
Shiatsu rotation directions be automatically shifted per minute for a thorough massage.
b) Press the button again to turn on the heat, then shiatsu works with heat.
c) Press and hold on 3 seconds to turn off the massager.
Note: It can not be only heat without shiatsu.
5. You may soften the massage pressure by placing a towel between yourself and
the massager.
3
Setup and Operation
• For your own safety we equip the massager with a protection against over-heating.
Heat is created in the motors when placed under great stress and excessive pressure. Before
this could create any risk and after a runtime of 15 Minutes. The massager will switch off
automatically and will only allow switching on again after an appropriate downtime.
• Likewise, you should allow your body some rest periods. To avoid straining your muscles too
much, we recommend to not exceed a continuous massage of 15 Minutes.
• The massager willl automatically switch off after 15 minutes timer run out.
• Remove the adapter from the outlet when not in use.
• Do not setup or use the massager in a bathroom or similary wet / damp areas.
