Comfee CLC27N3AWW, Owner'S Manual, Page: 12 / 19

P.21
Operating Instructions
P.22
Operating Instructions
View of control panel
- Express
- Dry
Press Steam 3 seconds to select Express function.
This option reduces the overall washer cycle time by optimizing the wash, rinse and spin actions
and/or gently raising the wash temperature to get clothes cleaned faster. Option is available on
Normal, Perm press, Heavy Duty, Bulky, Sports wear cycles. Total wash time will vary based on cycle
chosen and options selected.
Press the Dry button continuously to choose the dry level: Time Dry 30,60,90min /More Dry /
Normal Dry/ Less Dry/ Air Fluff.
Time Dry 30,60,90min : Drying your laundry and finish within given time. (30/60/90 minutes)
More Dry : This level leaves the cloths completely dry and ready to use.
Normal Dry :This level leaves the cloths ready to fold and store in the wardrobe.
Less Dry : This level leaves the cloths with some humidity. Perfect for ironing.
Air Fluff : To prevent wrinkles. Drum will rotate every half hour and stop half hour, shaking up
the clothes to avoid laundry left in washing machine. The fan will also circulate air
through the washer to prevent odors and keep clothes scent fresh. This function lasts
for up to 8 hours.
Note!
Drying hints
- Thoroughly spin you laundry before drying.
- To ensure proper drying, please sort your laundry according to the fabric
type and drying temperature.
• Clothes not suitable for drying
- Particularly delicate items such as synthetic curtains, woolen and silk,
clothes with metal inserts, nylon stockings, bulky clothes, such as
jackets, bedcovers, quilts, sleeping bags and duvets must not be dried.
- Clothes padded with foam-rubber or materials similar to foam-rubber
must not be machine dried.
- Fabrics containing residues of setting lotions or hair sprays, nail
solvents or similar solutions must not be machine dried in order to avoid
the formation of harmful vapours.
•
- Synthstic should be set the proper drying time.
- My Cycle
To save a favorite cycle, set the desired setting for wash cycle, soil level, spin speed and
wash temp settings and hold down the My Cycle button for 3 seconds, A beep will sound to
indicate the cycle has been saved.
To use your custom cycle, press the My Cycle button before washing a load.
To change the saved cycle, set the desired setting and hold down the My cycle button for 3
seconds.
View of control panel
-Soil level
It is suitable for different level of soil (from light to heavy).
The default level is , choose the soil level according to needs.
-Temp.
When needed, the washing temperature can be adjusted by pressing the temperature
button in the following steps: Tap Cold - Cold - Warm - Hot - Ex. hot.
-Spin
Press the button to change the spinspeed.
Ex. Ex.
different for the program
-Steam
SteamCare is the function added before main wash, which will generate warm
steam to to sterilize and give performance especially for cold wash.
NOTE:
When using My cycle, wash options cannot be modified after the cycle has been started.
NOTE:
If you change wash options with My Cycle before starting the cycle, the My Cycle light will
turn off and you will be returned to the base cycle.
Washing clothes at first time
Before washing clothes at first time, the washing machine shall be operated in
one round of the whole procedures without clothes in as follows:
1.Connect power source and water.
2.Put a little detergent into the box and close it.
3.Press the button “On/off”.
4.Press the button “Start/Pause”.