Comfee CGT 60 EAA, User Manual, Page: 42 / 64

1. The salt container must only be refilled when the salt warning light in the control panel comes on.
Depending on how well the salt dissolves, the salt warning light may still be on even though the
salt container is filled.
If there is no salt warning light in the control panel (for some Models),you can estimate when to fill
the salt into the softener by the cycles that the dishwasher has run.
2.
If salt has spilled, run a soak or quick program to remove it.
Always use the salt intended for dishwasher use.
Th e salt container is located bene ath the lowe r basket and should b e filled as explaine d
in th e following :
Warning!
Only use salt specifically de sign ed for dishw ashers use! Every other type of
salt not spe cifically designed fo r dishwash er use , especially table salt, will
damag e the water softener. In case of damag es cau sed by the use of unsu itable
salt the manu fa cturer does no t give any warran ty n or is liable for any da mages caused.
Only fill with sa lt be fo re ru nning a cycle.
Th is will prevent an y gra ins of salt or salty water, w hich ma y have bee n spilled,
remainin g on the bottom of the machine for any period of time, which m ay ca use
corro sion.
The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes, which can
leave spots and streaks. It also improves drying by allowing water to roll off the dishes. Your dishwasher is
designed to use liquid rinse aids. The rinse aid dispenser is located inside, on the door and next to the detergent dispenser.
To fill the dispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely black.
The volume of the rinse aid container is about 110ml.
Rinse Aid Dispenser
Function of Rinse Aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, a spot and streak free drying.
Warning!
Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser with any other substances
(e.g. Dishwasher cleaning agent, liquid detergent). This would damage the appliance.
Fill the salt container to its maximum limit with water. It is normal for a small amount of water
to come out of the salt container
A After the lower basket has been removed, unscrew and remove the cap from the salt container.
B
Place the end of the funnel (supplied) into the hole and poor in about 1.5kg of dishwasher salt.
C
D After filling the container ,
screw back the cap tightly.
E The salt warning light will stop being after the salt container has been filled with salt.
F Immediately after filling the salt into the salt container, a washing program should be started
program Otherwise the filter system, pump or other important parts of the machine may be damaged
by salty water. This is out of warranty.
(We suggest to use a short
).
36