background image

IOM - DOUBLE ECCENTRIC BUTTERFLY VALVES

 UNIWAT® VF791

©COMEV

AL

 V

AL

VE SYSTEMS 

Technical Dept. Ref. IOM - DOUBLE ECCENTRIC BUTTERFL

Y V

AL

VES, UNIW

AT® VF791 - Ed.20/07

Comeval V

alve Systems reserves the right to alter any technical data contained in this Manual without prior notice. Regularly updated data on www

.comeval.es

INSTALLATION, OPERATING

AND MAINTENANCE MANUAL

DOUBLE ECCENTRIC BUTTERFLY VALVES

1. GENERAL INFORMATION ON THE MANUAL .............2

2. NOTES ON POSSIBLE DANGERS ................................2

  2.1 Significance of symbols 

 .............................................2

  2.2 Explanatory notes on safety information

 .....................2

3. PRESERVATION, STORAGE, HANDLING AND 

TRANSPORT ......................................................................2

4. DESCRIPTION ................................................................2

 

4.1 General Description / Operating principles

 .................2

  4.2 Area of Application ......................................................2

  4.3 Technical data - remarks ............................................3

  4.4 Marking/nameplate

 .....................................................3

  4.5 CE marking. Intended use acc. to PED

 ......................3

5. INSTALLATION ..............................................................3

  5.1 General remarks on installation ..................................3

  5.2  Assembling additional modules

 ..................................4

  5.3 Requirements at the place of installation ....................4

6. COMMISSIONING & OPERATION .................................4

7. CARE AND MAINTENANCE ..........................................5

8. TROUBLESHOOTING ....................................................6

9. TROUBLESHOOTING TABLE .......................................6

10. DISMANTLING THE VALVE ........................................7

11. GOODS RETURN & DISPOSAL ..................................7

12. WARRANTY / GUARANTEE

........................................7

13. PARTS LIST ..................................................................8

14. ANNEXES .....................................................................8

  14.1  Declaration of Conformity

 .........................................8

  14.2  Data Sheet ................................................................8

Contents

Series UNIWAT® VF791

Summary of Contents for UNIWAT VF791 Series









Reviews: