6
IE-SNC-T43(4)11-02
Info mode
If in doubt of setting of installed transducer, verification of its address is enabled even
without using computer. Power should be connected.
Unscrew transducer cover and shortly press button next to connection terminals (jumper
must be open). Actual adjusted address of transducer is displayed at decimal code. Next press of
button exits info mode and actual measured values are displayed.
Note: No measurement and communication is possible during info mode. If transducer stays in info
mode for longer than 15 s, transducer automatically returns to measuring cycle.
Operating conditions:
Operating temperature range: -30 to +70 °C, with switched OFF display up to +80°C
Operating relative humidity range: 0 to 100 %RH
Outer influence in accordance with EN 33-2000-3: normal environment with those specifications:
AE1, AN1, AR1, BE1
Working position: negligible
Electromagnetic compatibility: complies EN 61326-1
Storing conditions: temperature -30 to +80 °C, humidity 0 to 100 %RH without condensation
Dimensions: case with electronics 89 x 73 x 37 mm, length of stem 75 mm
Weight: approximately 200 g
Material of the case: ABS
Not allowed manipulation
It is not allowed to operate the device under conditions other than specified in technical parameters.
Devices are not designed for locations with chemically aggressive environment.
End of operation
Device itself (after its life) is necessary to liquidate ecologically!