Thank you for your purchasing our product.
For your safety :
Read this manual carefully for proper handling and operation before using.
Keep this manual in a safe place for future reference.
●
Appearance
●
Specifications
Frequency Range : 2‐30MHz
Input Impedance : 50Ω
Max. Input Power : 150W (PEP)
VSWR : 2.0 or less (2‐18MHz), 3.0 or less (18‐30MHz)
Connector : Balun SO‐239 (M‐J type)
Antenna length : Approx. 25m (82ft)
Caution
You could be injured, or property
damage could be caused if you
don’t follow the below instructions.
●
Parts List
1. CWD‐230 Antenna
… 1 set
(w / Balun)
Warning
you might be killed or injured if you
don’t follow the below instructions.
Caution
①
Check SWR before using. COMET Antenna Tuner
CAT‐300 is highly recommended for tuning. (In case
you use the tuner, make sure to check its max power.)
②
Operation at this antenna in a residential area is
likely to cause interference. You’ll be required to take
whatever measures to correct the interference.
③
This antenna is outdoor large equipment, so you’ll
be careful when you erect this antenna in order not to
bother your neighbors.
Instruction Manual
Warning
: you might be killed or injured if
you don’t follow the below instructions.
①
Select a safe place, according to the related laws
and regulation in your country.
②
Choose a calm day to erect the antenna to avoid
accidents.
③
Do not try to erect the antenna while lightning.
④
Do not touch the antenna while transmitting,
otherwise you might get burned.
⑤
Do not erect this antenna near any overhead
wires or illuminating lamps. It would cause a serious
accident if the antenna falls.
⑥
Select a stable site. Erecting the antenna in a
precarious place might cause serious accident.
⑦
Be careful not to fall any tools or screws from
the high place while erecting the antenna.
Make sure to fix the coax cable securely. Otherwise
stiff wind could fan the cable, and cause the serious
damage.