IE-COM-D0221-05
15
Clearing procedure is in progress. The duration is indicated by
displaying of already cleared memory in % (digits 0 to 100).
After memory is cleared it is possible to select one of three logging
modes (MODE) by using arrow keys (non cyclic logging is indicated
by symbol n.CYC, cyclic logging by symbol CYCL and manual logging
by symbol Man). If manual logging mode is selected, after
confirmation by ENTER key logging is active. In automatic logging
mode (i.e. cyclic or non cyclic) last applied storing interval is offered
to confirm or modify. See above procedure.
Logging stop from keyboard
Logging stop is enabled by confirmation of menu item STOP by
pressing ENTER key.
Reading STOP NO is displayed to enable logging stop. Use arrow
keys to modify to STOP YES. Logging is still in progress.
Logging is stopped after confirmation selection STOP YES by
pressing ENTER key. Instrument then returns to default mode of
displaying actual values.
