36
EN
5. System function
5.1 PERFORMING CALLS
5.1.1 How to call from the external unit
f
To send the call from an external unit, touch the call pad
corresponding to the user you want to contact.
» On the external unit the camera LED will light up, the LED
will flash and the confirmation tone will sound. The video image
from the external unit will appear automatically on internal
monitor/s.
»
If the system is busy:
the
LED will flash and the external unit
will emit the system busy tone.
5.1.2 How to answer a call from an internal unit
» On receipt of a call from the external unit you will hear the call
ringtone
f
Press to enter into communication with the caller.
» the
LED will illuminate on the external unit.
f
Press again to terminate the call.
A call from the external unit always takes priority over an
intercom communication or a paging call
» the call in progress will be ended for the other devices.
5.1.3 How to transmit a call to the other internal
units
This function can be used to transmit a call to the other internal
units set to the same user code or set to another user code
(for programming see
"4.2.3.2 How to program the INTERCOM
).
f
Press the programmed button to send the call.
»
If the system is busy:
the
LED will flash 4 times
5.1.4 How to answer a call from an internal unit
» On receipt of a call from the internal unit you will hear the call ring-
tone. With "Privacy mode on" the internal unit will ring in any case.
f
Press to enter into communication with the caller.
f
Press again to terminate the call.
A call from the external unit always takes priority over an
intercom communication or a paging call
» the call in progress will be ended for the other devices.
the system is busy
1
2
the system is busy
INT
set to
1
2
f
Press the desired key once to activate the function associated with it.
Wait for approximately 1 sec. before pressing the same key again. Pressing the same key several times in quick succession will
cancel the command.
