35
EN
5. System function
5.1 PERFORMING CALLS
5.1.1 How to call from the external unit
To send the call from an external unit, touch the call pad
corresponding to the user you want to contact.
» On the external unit the camera LED will light up, the
LED will flash and the confirmation tone will sound. The
video image from the external unit will appear automati-
cally on internal monitor/s.
»
If the system is busy:
the
LED will flash and the exter-
nal unit will emit the system busy tone.
5.1.2 How to answer a call from an internal unit
» On receipt of a call from the external unit you will hear the
call ringtone
Press to enter into communication with the caller
» the
LED will illuminate on the external unit.
Press again to terminate the call.
A call from the external unit always takes priority over an
intercom communication or a paging call
» the call in progress will be ended for the other devices.
5.1.3 How to transmit a call to the other internal
units
This function can be used to transmit a call to the other internal
units set to the same user code or set to another user code (for
programming see page
23 "4.2 Configuration Capacitive-
Press the programmed button to send the call
»
If the system is busy:
the
LED will flash 4 times
5.1.4 How to answer a call from an internal unit
» On receipt of a call from the internal unit you will hear the
call ringtone. With "privacy mode on" the internal unit will
ring in any case.
Press to enter into communication with the caller
Press again to terminate the call.
A call from the external unit always takes priority over an
intercom communication or a paging call
» the call in progress will be ended for the other devices.
the system is busy
1
2
the system is busy
2
1
INT
set to
Lock-release key
Key 1 Programmable button
Key 2 Self-ignition function (programmable)
Privacy mode
Answer call / Paging call