Comelit 6741W, Technical Manual, Page: 12 / 36

12
Button configuration
By default the buttons are configured with the functions shown in the table:
AP
ACT AI CCS D
Legend
AP Lock-release
Press and release key
ACT Actuator
AI ** Self activation
CAMG Remote camera module with generic address
CAM1 Remote camera module with address 220
CAM2 Remote camera module with address 221
CCP * Call to main switchboard
CCS * Call to secondary switchboard
K Caretaker door-entry phone call
PAN * Panic
INT General or selective intercom. Default: single-family call
INTb Two-family intercom call - for Kit only
NULL No function
D ** Door opening upon call (Doctor) mode Press and hold key
PROG
Programmed functions, see “Advanced configuration” . In this DIP-switch setting, the buttons control the programmed
functions; the NON-programmed buttons control the functions referred to on line A (default)
.
* Cannot be used in Kit systems
** Pressing and holding enables / disables the function , see “Press and hold buttons” on page 11
From firmware version 2.1.0 onwards, the door entry monitor button configuration can be changed in 2 different ways:
- using S2 DIP-switches 1-2-3-4
- via the door entry monitor menu
Configuration using the DIP-switches
It is possible to change the default configuration of the buttons by changing the positions of the S2 DIP-switches 1-2-3-4 on the
rear of the door entry monitor to one of the combinations (B-P) suggested in the table below. All the buttons will change function.
Standard configurations
S2 Dip-switches Art. 6741W (/BM)
DIP 1 DIP 2 DIP 3 DIP 4
default
€
A OFF OFF OFF OFF AP ACT AI CCS D
B ON OFF OFF OFF AP CCS AI INT INTb
C OFF ON OFF OFF AP INT AI INTb ACT
D ON ON OFF OFF AP ACT CCS CCP PAN
E OFF OFF ON OFF ACT ACT ACT ACT ACT
F ON OFF ON OFF AP INT ACT CCS CCP
G OFF ON ON OFF AP AI D K CCS
H ON ON ON OFF AP INTb INT AI INT
I OFF OFF OFF ON AP CCS PAN D AI
J ON OFF OFF ON AP K CCS PAN CCP
K OFF ON OFF ON AP CCP K PAN ACT
L ON ON OFF ON AP AI CAMG CAM1 CAM2
M OFF OFF ON ON AP INTb AI INT ACT
N ON OFF ON ON AP INT INT INT INT
P
OFF ON ON ON NULL NULL NULL NULL NULL
ON ON ON ON PROG
< BACK