manualshive.com logo in svg

Comdial Impact 8012S Series, User Manual, Page: 47 / 146

Share
Download
Comdial Impact 8012S Series User Manual Download Page 47

DSUII Attendant User’s Guide

August, 03

Comdial

37

3.7  Executive Override

You can override a call in progress or a Do Not Disturb condition at 
another telephone if the system installer has enabled the executive 
override feature at your telephone. (If the feature is not enabled, an 
error tone sounds and screen options remains displayed.) Conditions 
for executive override are as follows:
Calling station has class of service that enables busy override.
Calling station is switched to override voice path.
When the calling party dials the override code, the called party 
receives six tone bursts. The called party may respond and will be 
heard by the calling station and outside party. 

•  To override an in-progress call at another telephone,

1.  MAKE intercom call AND HEAR a busy signal.
2.  DIAL  *03  OR SELECT  NEXT until you can SELECT  OVER (all 

parties will hear several tone bursts).

3.  JOIN in-progress call.

•  To override a Do Not Disturb condition at another 

station,

1.  SELECT OVER to disable the Do Not Disturb condition at the called 

station.

2.  SPEAK your announcement (if in voice-first mode) OR HEAR ring-

back tone (if in tone-first mode).

NOTE:  This action disables DND condition at the other tele-
phone until DND is reset.

Summary of Contents for Impact 8012S Series



















































































































































Reviews:

No comments