Comdial and FXT Attendant Manual Download Page 67

Page: 67 / 164

•

To turn off the message waiting light at a busy or idle
station,

1. PRESS

INTERCOM

2. DIAL

3. DIAL extension number OR PRESS

DSS/BLF

button of station

that was alerted. The message-waiting light of called station will
turn off.

•

To turn off the message-waiting light during
message-delivering conversation,

1. PRESS

INTERCOM

once if off-hook, twice if on-hook.

•

To receive a message at an alerted
station,

1. OBSERVE flashing message waiting light and

the LCD message indicating who called for you.

2. SELECT

CALL

to dial the messaging station

automatically.

3. SELECT

CLEAR

to clear the message from

your station.

Attendant Manual

GCA70-250

Nonverbal Messaging

Call J Doe

CALL

CLR

Receiving a Message

Summary of Contents for and FXT





































































































































































Search results

Summary of Contents for and FXT

Reviews:

Related manuals for and FXT

Brands by name

Popular brands

Comdial and FXT, Attendant Manual

Search results

Summary of Contents for and FXT

Reviews:

Related manuals for and FXT

Brands by name

Popular brands