Comdial and FXT, Attendant Manual

Page: 25 / 164

Night-Transferred Calls -
Line Access From Any Station
You can use your attendant station to manually place the system in the night
ringing mode by dialing a code or pressing a preprogrammed button. This mode
overrides the direct, day 1, and day 2 automatic ringing modes. While this
feature is active, calls on lines assigned to delayed and night ringing both ring at
the various stations. No other ringing occurs unless the installer has arranged for
a loud ringing bell or other external ringing device to sound when calls appear on
those assigned lines during the night ringing mode. These calls may be answered
at any telephone in the system if a user dials the proper code.
•
If your telephone rings,
1. PRESS line button with flashing light.
2. LIFT handset to talk.
The installer can assign one or more of the four system relays to track the ring
signal on any or all lines that he or she assigns to them. The installer can arrange
for the tracked ringing to be during the direct, delayed, day 1, day 2, or night
ringing modes. Typically, the installer wires a relay so that its contact actuation
causes an external bell or other device to sound.
You can hear this external ringer and dial a code. When you do this, you can
answer any line that the installer has assigned to that external ringer through the
relay programming.
•
When you hear loud ringing anywhere in the system,
1. LIFT handset.
2. PRESS
INTERCOM
.
3. CHOOSE ringing zone:
• DIAL
65
through
68
to select ringing zone
(1-4).
• DIAL
69
to answer for any zone.
Attendant Manual 15
GCA70-250 Answering Calls