Comdial and FXT Attendant Manual Download

Page: 16 / 164

Understanding the Basic Functions

Your speakerphone provides many versatile features for your use. These features
are explained in terms of what they allow you to do.

Alphanumeric Display (Liquid Crystal Display—LCD)

•

Displays time, day, date, and active call information.

•

Keeps you apprized of the status of your telephone.

•

Provides programming prompts.

Auxiliary Jack (available only on Impact 8024S)

•

Allows you to connect a headset, an external amplified ringer, a tape
recorder, or an external paging amplifier to your telephone.

Message-Waiting Light

•

Indicates that a message awaits pick up.

Microphone Opening

•

Allows hands-free operation of speakerphone (speak clearly toward
microphone opening).

Speaker

•

Sounds distant party’s voice.

•

Sounds ringing and call-in-progress tones.

Attendant Manual

Getting Started

GCA70-250

Summary of Contents for and FXT





































































































































































Search results

Summary of Contents for and FXT

Reviews:

Related manuals for and FXT

Brands by name

Popular brands

Comdial and FXT, Attendant Manual

Search results

Summary of Contents for and FXT

Reviews:

Related manuals for and FXT

Brands by name

Popular brands