Comdial and FXT Attendant Manual Download Page 137

Page: 137 / 164

Abbreviation

Feature

Definition

GPLSN

Group Listen

When chosen as a feature, stores a button that
enables loud speaker broadcast of distant party’s
voice.

HDSET

Headset

When chosen as a feature, stores a button that
enables headset operation.

HAVE HOLD

Ask Caller To Hold

Send a non-verbal response to a SOHVA caller so he
or she will know to place the outside caller on hold.

LIGHT

Light (contrast)

Makes the LCD screen lighter.

MSG

Message

Turns on message waiting light at another station.

MUSIC

Background Music

Turn on the background music at your station.
When chosen as a feature, stores a button that
enables the function.

Next Display

Shows the next display.

NoANS

No Answer/Forward

Forwards calls that ring at your station but receive
no answer.

OPTIONS

Options

Selects interactive button features.

OVER

Override

Overrides either a do-not-disturb condition or a busy
signal at a station you have called.

PAGE

Paging Zone

When chosen as a feature, stores a button that
provides one-button access to paging.

PARK

Park Orbit

When chosen as a feature, stores a button that
provides one-button parking of calls.

PCKUP

Pick Up

When chosen as a feature, stores a button that
allows you to pick up a call ringing elsewhere.

PERS

Personal

Route your personal intercom calls to a different
station location.

Attendant Manual

127

GCA70-250

Display Abbreviations

Summary of Contents for and FXT





































































































































































Search results

Summary of Contents for and FXT

Reviews:

Related manuals for and FXT

Brands by name

Popular brands

Comdial and FXT, Attendant Manual

Search results

Summary of Contents for and FXT

Reviews:

Related manuals for and FXT

Brands by name

Popular brands