Comdial and FXT, Attendant Manual

Page: 121 / 164

•
To transfer calls that would normally ring at your station to
the alternate attendant you’ve selected,
1. PRESS the installer-programmed ALTERNATE button. (Your
LCD will display “Alternate” and the extension number of the
alternate attendant.)
•
To return ringing of calls to your telephone,
1. PRESS the installer-programmed ALTERNATE button again.
Overflow Transfer
By using this feature during peak calling periods, calls that normally ring at your
station will also ring at the overflow station. If the installer has programmed the
OVERFLOW feature access button, you can press this button to select overflow
transfer. You can either change the overflow station selected by the installer, or if
none was selected, you can enter your own selection from your station.
•
To designate an overflow station,
1. PRESS
INTERCOM
.
2. DIAL
*#0*05
.
4. DIAL overflow station number:
• DIAL
1001
to
1480
for stations 1–480.
•
To set the overflow transfer feature,
1. PRESS the installer-programmed Overflow button. If an
overflow attendant is programmed, the light next to the
OVERFLOW button will illuminate, and incoming calls will ring
at both stations.
•
To cancel the overflow transfer feature,
1. PRESS the OVERFLOW button again.
Attendant Manual 111
GCA70-250 Attendant Features