Comdial and FXT Attendant Manual Download

Page: 104 / 164

Station Enabling and Disabling

You can disable a station and make it unavailable for system use if it becomes
unusable for some reason.

•

To disable a station,

1. PRESS

INTERCOM

2. DIAL

*#0*52

3. DIAL station number (

1001

1480

for stations

1–480).

4. PRESS

to disable the station (speakerphone displays a

to indicate it is disabled).

5. PRESS

SPEAKER

to end.

•

To re-enable station,

1. REPEAT the previous procedure.

Telephone Line Enabling and Disabling

You can disable a line and make it unavailable for system use if it becomes
unusable for some reason.

•

To disable a line,

1. PRESS

INTERCOM

2. DIAL

*#0*32

3. DIAL code as follows to choose line:

• DIAL

99#

for lines 1–99,

• DIAL

100

128

for lines 100–128.

4. PRESS

to disable line (LCD speakerphone displays a

indicate a disabled line).

5. PRESS

SPEAKER

to end.

Attendant Manual

Attendant Features

GCA70-250

Summary of Contents for and FXT





































































































































































Search results

Summary of Contents for and FXT

Reviews:

Related manuals for and FXT

Brands by name

Popular brands

Comdial and FXT, Attendant Manual

Search results

Summary of Contents for and FXT

Reviews:

Related manuals for and FXT

Brands by name

Popular brands