COMCOLOR FW 5000, User Manual

Page: 71 / 186

Scan Settings
2
ComColor FW Series User’s Guide
2-9
Assign PIN codes when saving scanned jobs on
the internal hard disk of this machine. The PIN
code set here is required when using the RISO
Console to download to a computer.
[OFF], [ON]
Enter value (8 digits or less)
1
Touch [PIN code].
The [PIN code] screen is displayed.
2
Touch [ON].
3
Use the numeric keys to enter the
PIN code.
4
Touch [OK].
Select the original type to perform the appropriate
image processing for saving the scanned data.
[Line/Photo]
Select this when the original has both text and photos.
[Line]
Select this when the original has text or illustrations.
[Photo]
Select this when the original has photos.
1
Touch [Original Type].
The [Original Type] screen is displayed.
2
Select the original type.
3
Touch [OK].
Correct the color balance of the scanned data.
For more information, see "Gamma Correction"
(p. 1-17) in "Copy".
Specify the image processing appropriate for the
original.
For more information, see "Image Control" (p. 1-17)
in "Copy".
This function makes the background color (base
color) lighter so that the text is easier to read when
scanning text originals with a background color or
originals printed on colored paper.
For more information, see "Base Color Level"
(p. 1-18) in "Copy".
PIN Code
Original Type
Gamma Correction
• When [Color Mode] has been set to [Grayscale]
or [Black], the gamma value can only be
adjusted for K. The gamma value cannot be
corrected for C-R, M-G, or Y-B. (p. 2-7 "Color
Mode")
Image Control
Base Color Level