COMCOLOR FW 5000, User Manual

Page: 32 / 186

ComColor FW Series User’s Guide
30
Installing the Printer Driver
If you want to send data from a computer to print on
this machine, you must first install the printer driver
onto the computer.
The system requirements for activating the printer
driver are described in the table below.
1
Load the included DVD-ROM in the
computer's DVD-ROM drive.
The installation wizard automatically starts up. If the
installation wizard does not start up, double-click the
file "Install.exe" on the DVD-ROM.
2
Select the desired language in the
pull-down menu and click [OK].
3
Click [Next].
4
Follow the on-screen instructions to
configure the settings.
5
When the message for printing a
test page is displayed, click [Yes].
6
Confirm that the test page is printed
correctly and click [OK].
7
Click [Finish].
When the printer driver is installed over the existing
one, the computer restarts.
8
Remove the DVD-ROM from the
computer.
• Log in as a user with administrator privilege.
• Close all active applications.
• For specific instructions on how to uninstall the
printer driver, see the separately provided
"Administrator's Guide".
Operating Environment
Memory 1 GB or more
CPU Intel or fully compatible CPU
Hard disk
2 GB or more free space
(Space enough to operate the OS)
Display 1024 × 768 or greater resolution
Installing
• Pressing [Show ReadMe] will bring up the
ReadMe. The ReadMe includes precautions
for using the machine. Be sure to read it.
• If you do not want to restart the computer
now, remove the check mark from the
[Restart now] check box before clicking
[Finish].
• Keep the DVD-ROM in a safe place for
future reference.