COMCOLOR FW 5000, User Manual

Page: 163 / 186

PostScript Kit
8
ComColor FW Series User’s Guide
8-21
■
Print Face
When [Alternating Overlay (Long Edge)]/[Alternating
Overlay (Short Edge)] or [Each Page + Alternating
Overlay (Long Edge)]/[Each Page + Alternating Overlay
(Short Edge)] is selected in [Print Pattern], specify
whether to print the form data on the front or back side of
the paper.
■
Preferred Layer
When [Each Page Overlay], [Each Page + Alternating
Overlay (Long Edge)], or [Each Page + Alternating
Overlay (Short Edge)] is selected for [Print Pattern],
specify whether to assign priority to the form data or the
output data, and overlay it on the other.
[None]
Priority is given to the output data or form data based on
which is darker in color, and it is overlaid on top of the
other.
[Document]
Priority is given to the output data (original) layer, and it is
overlaid on top of the form data.
[Form]
Priority is given to the form data layer, and it is overlaid
on top of the output data.
When the check box is selected, printouts are
printed in reverse order.
For more information on each setting item, see
"[Environment] Tab" (p. 3-26) in "Print".
• When [Each Page + Alternating Overlay (Long
Edge)]/[Each Page + Alternating Overlay (Short
Edge)] is selected, specify the side on which to
print only the form.
Output data
When [Front] is selected for [Print Face]
Front Back
Front Back
Form 1
When [Back] is selected for [Print Face]
• If the image size of the priority layer is larger
than that of the non-priority layer, the image of
the non-priority layer may not be printed.
• If the output data and form data include the
same colors, the parts of the image where those
colors overlap may not be reproduced correctly.
Reverse Order
[Environment] Tab