COMCOLOR FW 5000 Page 130 User Manual Download

Page: 130 / 186

ComColor FW Series User’s Guide

6-10

[Print] Menu

You can check the status of jobs that are sent from
the printer driver and saved on the internal hard
disk of this machine.

[Delete]

Delete the selected jobs.

[Details]

You can view the settings, file capacity, and other
information on the selected job.

[Print] Menu Screen

• In the following cases, all job names are

displayed in the list.
- When user login is not required
- When the user is logged in with the

administrator account

• In the following cases, the job name is displayed

as "*****".
- Jobs with the [Hide Job Name] check box

selected on the printer driver
(p. 3-24 "PIN Code")

- Jobs that belong to users other than the user

currently logged in when [Job Name Display]
is set to [OFF] on the administrator menu

Summary of Contents for FW 5000


























































































































































































Search results

Summary of Contents for FW 5000

Reviews:

Related manuals for FW 5000

Brands by name

Popular brands

COMCOLOR FW 5000, User Manual

Search results

Summary of Contents for FW 5000

Reviews:

Related manuals for FW 5000

Brands by name

Popular brands