R
EAR
P
ANEL
The rear panel of your Wireless Gateway features a Reset button, as well as ports for attaching the supplied
power adapter and connecting additional devices.
Reset Button
(Recessed to protect against accidental reset)
Pressing the Reset button for varying lengths of time performs two types of reset operations.
•
Normal Reset
– reboots the Wireless Gateway but retains current configuration settings.
Use a thin object, press the reset button for at least 2-5 seconds and release.
•
Factory Reset
– deletes all changes made to the original configuration settings and restores the Wireless
Gateway to the factory configuration.
Use a thin object, press and hold the reset button for 15 seconds or more before releasing.
You can also reset your Wireless Gateway using the
Web Management Interface
at
http://10.0.0.1
.
CAUTION
:
If you select Restore Factory Settings, be certain you want to reset ALL settings (such as passwords,
parental controls and firewall settings) before proceeding! All customized settings made to your Wireless
Gateway will be lost. Also, a Factory Reboot will take your Wireless Gateway out of Bridge Mode if it
had been previously enabled. Call 1-800-XFINITY to re-enable Bridge Mode.
Wireless Gateway User Guide
5
LED
Table 1. Gigabit Ethernet Connectors LED Indicators
Green
Indicates Gigabit Ethernet in use
Orange
Indicates Fast Ethernet in use
The back of your Wireless Gateway (Fig. 1) has the following
connectors and controls:
A
Reset button
: resets the Wireless Gateway (see details below)
B
USB host connector
[For Future Use]
C
Tel 1
connector
for analog phone line
D
Tel 2
connector
for analog phone line
E
Gigabit Ethernet (1 - 4)
connectors
for use with a computer
LAN port (Each port has two LED lights. See Table 1 below.)
F
Cable
connector
for the coaxial cable
G
Power
connector
for the power cord
Fig. 1