9
www.combisteel.com
3. Technical Parameters
Model
CUBE SS1/EC1
CUBE SS2/EC2
CUBE SS3/EC3
CUBE SS4/EC4
Dimensions (mm)
595x595x570
595x595x570
595x595x570
595x595x570
Voltage (V)
220-240
220-240
220-240
220-240
Power (W)
2670
2670
2670/2000
2670/2000
Thermostat
300°C
300°C
300°C
300°C
Temp. limiter
340°C
340°C
340°C
340°C
Function
Convection
Conv spray
Conv
top heating
Conv spray
+ top heating
Weight (kg)
35
36
38
39
4. Precautions & Recommendations
4.1 Operation Tips
1.
Installation and maintenance shall be done by professional technicians. If necessary, contact the technicians.
Grounding connection of the device must comply with the local regulations. (Warning: Improper operation,
installation or maintenance may cause property damage, injury or death etc.. Read this instruction manual
thoroughly before installing, operating or servicing this equipment.)
2.
This product is a commercial machine that needs to be operated by trained cook. Do not dismantle or self-
modify the machine. Dismantlement and self-modification may cause casualty.
3.
Before cleaning, unplug and cut off the power supply. During cleaning, do not aim at the appliance with
water jet. Water may conduct electricity, that may cause electric shock due to leakage.
4.
Do not pat the product or put any heavy objects onto it. Abnormal operation may cause damage and danger.
Do not touch the appliance with hands directly due to high temperature during or after operation, especially
the hot area with high temperature which may cause scald.
5.
Do not use extra power supply that not marked on the product.
6.
Do not use power knife that not conforming to safety standard.
7.
To prevent damage, turn off the switch ASAP when near the thunder zone.
8.
Do not destroy the furnace surface with hard or sharp objects.
9.
After working, turn off the switch.
10.
Circuit installation and maintenance shall be done by qualified technicians.
11.
If the power cord is damaged, to avoid hazard, substitution should be done by manufacturer or its
maintenance department or similar professional personnel.
12.
Do not aim at the electrical box with water directly, nor do immerse it into water for cleaning.
4.2 Storage & Transport
1.
The packaged device should be stored in a well-ventilated warehouse without any corrosive gas instead of
exposing to the open air. Should any temporary storage needed, please take measurement against raining.
2.
For safety sake, this device has already been checked by qualified personnel before transportation. Please
take care when handling it. Please check the delivery upon completeness and transport damage immediately
after receipt. In case of visible damage, do not accept. The carrier takes full responsibility for the damages
caused during transportation. Hidden damages should be reclaimed immediately after notice, as claims for
damages can only asserted within the effective period for complaints.
3.
During transportation, the machine should be carefully handled, do not put it upside down to prevent from
damaging the shell and inside.
Summary of Contents for CUBE EC1
