7
www.combisteel.com
Foods
Vacuum Freezer Storage
Vacuum Fridge Storage
Typical Storage
Fresh Beef & Veal
1-3 years
1 month
1-2 weeks
Ground Meat
1 year
1 month
1-2 weeks
Fresh Pork
2-3 years
2-4 weeks
1 week
Fresh Fish
2 years
2 weeks
3-4 days
Fresh Poultry
2-3 years
2-4 weeks
1 week
Smoked Meats
3 years
6-12 weeks
2-4 weeks
Fresh Produce, Blanched
2-3 years
2-4 weeks
1-2 weeks
Fresh Fruits
2-3 years
2 weeks
3-4 days
Hard Cheeses
6 months
6-12 weeks
2-4 days
Sliced Deli Meats
not recommended
6-12 weeks
1-2 weeks
Fresh Pasta
6 months
2-3 weeks
1 week
Troubleshooting
Under the proper circumstances, your 7529.0010 will give you top-notch vacuum performance. In some instances,
problems may arise. Please consult the troubleshooting menu before calling customer support.
7529.0010 will not turn on
•
Ensure that the machine is properly plugged into a grounded outlet.
•
Check the power cord for tears and frays. Do not use machine if power cord is damaged.
•
Make sure the ON/OFF button was properly pressed. LED screen will be illuminated when on.
7529.0010 does not pull a complete vacuum with pouch
•
Vacuum/seal time may not be set high enough. Set vacuum and seal times higher and vacuum again.
•
To vacuum and seal properly, the opening of pouch must be within the vacuum chamber.
•
If packaging from a roll pouch, make sure first seal is complete and there are no gaps in either seal.
•
7529.0010 and vacuum pouch need to be clean, dry and free of debris for the vacuum process to be successful. Wipe
surface of seal bar and inside of pouch and try again.
Vacuum pouch loses vacuum after being sealed
•
Sharp items can puncture small holes in pouches. To prevent this, cover sharp edges with paper towel and vacuum in a
new pouch.
•
Some fruits and vegetables can release gases (out-gassing) if not properly blanched or frozen before packaging. Open
pouch. If you think food spoilage has begun, discard food. If food spoilage has not yet begun, consume immediately. If
in doubt, discard food.
7529.0010 is not sealing pouch properly
•
Seal time may not be long enough. Increase seal time and try again.
•
Pouches will not seal if any moisture, food particles or debris are present in the seal area. Wipe the inside of the pouch
clean and try again.
•
Pouch must be properly placed along the seal bar. Make sure the entire pouch is over the seal bar and there are no
wrinkles in pouch material.
Error code
Cause
Remedy
E01
The micro switch is not closed when the
machine enters the heat seal mode
1.
Check if the lid closed;
2.
Check if the micro switch device in normal (GAS1
connecting wire, micro switch, 10P data cable, PCB
etc.)
Thank you for purchasing the Vacuum Sealer.
Happy Vacuuming!
