Assembly Instructions
Stainless steel TABLE with HDPE Top
Safety Tips
Whilst all care has been taken to remove sharp edges, care must be taken when
cleaning or handling to prevent risk of injury from exposed metal edges.
Do not overload the table top or shelf causing it to bend.
1
Parts List
1. Stainless Steel table with HDPE Top x 1
2. Galvanised Legs with Adjustable Feet x 5
3. Galvanised Shelf x 1
2
4. Grub Screws x 12
3
5. Allen Key x 1
5
4
Note: Be sure to check all packaging materials for any small parts that may have come
loose during transportation
Assembly
1. Remove all protective film, taking care to avoid scratching the surface.
2. Place the shelf on its side on the floor.
3. Insert the leg into the sockets situated at each corner of the shelf, lining up the socket with
the line marked on the leg.
［
Fig.1
］
4. Use grub screws to loosely fix the shelf to the legs, then stand upright
［
Fig.2,3 and 4
］
5. Position the table top onto the legs, ensuring each leg is firmly located in its corresponding
corner socket
［
Fig.5
］
6. Fix the table top in place using the remaining grub screws. Ensure the table top is both
level and securely fixed
［
Fig.6
］
Note: Adjust the feet if necessary to level the table.
Before using for the first time we recommend the table is cleaned thoroughly with a suitable
cleaning agent. Remove all cleaning residues and dry thoroughly.
Fig.1 Fig.2 Fig.3
Fig.4 Fig.5 Fig.6
Cleaning
Clean the table regularly using a cleaning agent suitable for use with stainless steel and
galvanised surfaces.
Always remove cleaning agents residues, this can discolour the surface.
Never leave any surface damp as this may cause discolouration.
